2017 Harvest International T1042 Base

Information

2017 Harvest International T1042

Our T series top drive augers are as straight forward as you can get. Built heavy with the highest quality parts, the T series will get the job done.

Features may include:

Durability
  • Double tapered bearings at discharge handle both radial & axial loads; superior to a ball bearing.
  • Iron Edge Flighting throughout entire auger: up to 50% thicker edge.
  • 12ga tubing throughout entire auger is heavier than the industry standard. (12ga on T10/13 ; 14ga on T8)
  • Powder Coat Plus for superior coating & longer lasting.
  • Brand new highway-rated tires & rims are standard on all of our T series models.
Safety
  • Small-gap intake & flex-hopper grate: a safety priority without sacrificing capacity.
  • Every service access requires a pin or bolt removal to decrease risk of accidents.
Serviceability
  • All grease points are easy access.
  • Removable 5/16” flighting at intake, 3/16” flighting throughout remainder – 1/4” remainder on T13.
Available Add-Ons
  • Flex hopper
  • Wheel & jack kit w/ guide handle
  • 3’ plastic bucket spout
  • Plastic hopper
  • Hydraulic lift
  • Extended lower gearbox mount

Photos

Highlights

  • Athens, Wisconsin
  • 2017
  • Harvest International
  • T1042 Base
  • Available
  • Maximum Extension: 25'-7"

Specifications

  • 2017
  • Harvest International
  • T1042
  • Base
  • General
  • Auger: 1500 lbs.
  • Lowered Reach: 16'-4" | Raised Reach: 11'-2" |Flighting Pitch 1st 24": 9"| Flighting Pitch Remainder: 9" | Frame Arms: 2 1/2" x 14ga | Axle Tube Size: 2 1/2" x 2 1/2" x 3/16" | Auger Flighting Core: 1 1/2"
  • Auger: 42'
  • Maximum Extension: 25'-7"
  • 12'-9"
  • Wheel: 86"
  • 1st 24": 5/16" | Remainder: 3/16"
  • Shaft Diameter: 1 3/8"
  • Bearing Size: 1"
  • PTO: 35hp | Electric: 10-15hp
  • Cable
  • 3500-5000 bu/h
  • 165/75 x 13
  • Tube Thickness: 14ga