2017 Harvest International T1036 Base
- Year 2017
- Make Harvest International
- Model T1036
2017 Harvest International T1036 Base
2017 Harvest International T1036
Our T series top drive augers are as straight forward as you can get. Built heavy with the highest quality parts, the T series will get the job done.
- Double tapered bearings at discharge handle both radial & axial loads; superior to a ball bearing.
- Iron Edge Flighting throughout entire auger: up to 50% thicker edge.
- 12ga tubing throughout entire auger is heavier than the industry standard. (12ga on T10/13 ; 14ga on T8)
- Powder Coat Plus for superior coating & longer lasting.
- Brand new highway-rated tires & rims are standard on all of our T series models.
- Small-gap intake & flex-hopper grate: a safety priority without sacrificing capacity.
- Every service access requires a pin or bolt removal to decrease risk of accidents.
- All grease points are easy access.
- Removable 5/16” flighting at intake, 3/16” flighting throughout remainder – 1/4” remainder on T13.
- Flex hopper
- Wheel & jack kit w/ guide handle
- 3’ plastic bucket spout
- Plastic hopper
- Hydraulic lift
- Extended lower gearbox mount
Weights
Weight
Auger: 1500 lbs.
Dimensions
Dimensions
Lowered Reach: 16'-4" | Raised Reach: 11'-2" |Flighting Pitch 1st 24": 9" | Flighting Pitch Remainder: 9"| Frame Arms: 2 1/2" x 14ga | Axle Tube Size: 1/2" x 2 1/2" x 3/16" | Auger Flighting Core: 1 1/2"
Length
Auger: 42'
Height
Maximum Extension: 25'-7"
Transport Height
12'-9"
Transport Width
Wheel: 86"
Flighting Thickness
1st 24": 5/16" | Remainder: 3/16"
Gearbox
Shaft Diameter: 1 3/8"
Drive Shaft
Bearing Size: 1"
Engine
Minimum Engine Power
PTO: 35hp | Electric: 10-15hp
Operational
Lift Mechanism
Cable
Operating Conditions
3500-5000 bu/h
Wheels & Tires
Tires, Rear Specification
165/75 x 13
Features
Features
Tube Thickness: 14ga